Cabletron Systems 5000, 5500 Manual

Contents

9032208 E4 Configuration Views3-3Interface Configuration ViewLast ChangeDisplays the value of sysUpTime at the time the interface entered its currentoperational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this objectcontains a zero value.Queue LengthDisplays the length of the outbound packet queue in packets.Packet SizeDisplays the largest Maximum Transmission Unit (MTU) that can betransmitted or received by the port, measured in octets.Interface Configuration ViewThis view provides device configuration information.To access this view, do the following:1. Within the Interface Device view, highlight the Interface icon.2. From the Icon Subviews menu, select IF Configuration.This view provides the following information:Operation StatusDisplays the current operating status of the interface or port. Possible valuesare On, Off, and Testing.Admin. StatusDisplays the current administrative state of the interface or port. Possiblevalues are On, Off, and Testing.Last ChangeDisplays the value of sysUpTime at the time the interface entered its currentoperational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this objectcontains a zero value.Network Name/AddressDisplays the network name/address for this interface or port.Physical AddressDisplays the physical (MAC) address of the interface or port.BandwidthDisplays the estimated bandwidth of the interface measured in bits persecond. For interfaces that do not vary in bandwidth or for which no accurateestimate can be made, a nominal bandwidth is provided.