Cabletron Systems Cyber SWITCH 1000 User Manual

Cabletron Systems Cyber SWITCH 1000 User Manual Manual pdf 53 page image

Workgroup Remote Access Switch 53IP R OUTING NETWORK WITH R EMOTE B RIDGE DEVICESConfigure the CyberSWITCHYou will then be prompted to verify your input. Make changes if necessary, or, if original inputcorrect, continue with configuration for RLAN interface.Press 1 to add the next interface. Configure the information for the WAN (RLAN) interface asfollows:1) LAN2) WAN3) WAN (Direct Host)4) WAN (RLAN)5) WAN (UnNumbered)Select Option or press for previous menu: 1INTERFACE NAME or to cancel? CorpOfficeEnter the IP Address in dotted decimal notationor to cancel? 128.1.1.1Enter the number of significant bits for the Subnet Mask[default = 16]? Enter the packet encapsulation type 1) for ETHERNET 2) for SNAP[default = ETHERNET]? Enter the MTU size in bytes [default = 1500]? Transmit Broadcast Address:1) 128.1.255.2552) 128.1.0.03) 255.255.255.2554) 0.0.0.05) Specify ExplicitlyEnter a Transmit Broadcast Address [default = 1]: RIP Send Control:1) Do Not Send.2) RIP Version 1.3) RIP Version 1 Compatibility.4) RIP Version 2.Enter RIP Send Control [default = 2]: RIP Receive Control:1) Do Not Receive.2) RIP Version 1 Only.3) RIP Version 2 Only.4) RIP Version 1 or Version 2.Enter RIP Receive Control [default = 4]: RIP Respond Control:1) Do Not Respond.2) RIP Version 1 Only.3) RIP Version 2 Only.4) RIP Version 1 or Version 2.Enter RIP Respond Control [default = 4]: RIP Version 2 Authentication Control:1) No Authentication.2) Simple Password.Enter a RIP Authentication Control [default = 1]: