Cabletron Systems Cyber SWITCH 1000 User Manual

Cabletron Systems Cyber SWITCH 1000 User Manual Manual pdf 67 page image

Workgroup Remote Access Switch 67IP ROUTING N ETWORK WITH PPP DEVICESConfigure SITE1The screen interaction will resemble the following:After you have entered all of the information for the interface, a summary screen will be displayed.If all of the configured information is accurate, follow the onscreen prompt to save the information.1) LAN2) WAN3) WAN (Direct Host)4) WAN (RLAN)5) WAN (UnNumbered)Select function from above or for previous menu: 1INTERFACE NAME or to cancel? LAN1Enter the IP Address in dotted decimal notationor to cancel? 128.1.1.1Enter the number of significant bits for the Subnet Mask[default = 16]? Enter the packet encapsulation type 1) for ETHERNET 2) for SNAP[default = ETHERNET]? Enter the MTU size in bytes [default = 1500]? Transmit Broadcast Address:1) 128.1.255.2552) 128.1.0.03) 255.255.255.2554) 0.0.0.05) Specify ExplicitlyEnter a Transmit Broadcast Address [default = 1]: 1RIP Send Control:1) Do Not Send.2) RIP Version 1.3) RIP Version 1 Compatibility.4) RIP Version 2.Enter a RIP Send Control [default = 2]: RIP Receive Control:1) Do Not Receive.2) RIP Version 1 Only.3) RIP Version 2 Only.4) RIP Version 1 or Version 2.Enter a RIP Receive Control [default = 4]: RIP Respond Control:1) Do Not Respond.2) RIP Version 1 Only.3) RIP Version 2 Only.4) RIP Version 1 or Version 2.Enter a RIP Respond Control [default = 4]: RIP Version 2 Authentication Control:1) No Authentication.2) Simple Password.Enter a RIP Authentication Control [default = 1]: