Cabletron Systems Cyber SWITCH 1000 User Manual

Cabletron Systems Cyber SWITCH 1000 User Manual Manual pdf 85 page image

Workgroup Remote Access Switch 85IPX ROUTING N ETWORKConfigure IPX Routing: Masternet (Detroit)C ONFIGURE IPX R OUTING : M ASTERNET (D ETROIT )Using the detailed instructions provided in the Simple Remote Bridging chapter, use the CFGEDITprogram to configure Resources and Lines for the Detroit Master Network (masternet).When complete, continue with the unique configuration elements for this IPX example. Theseinclude:• configuring appropriate devices,• configuring a Remote LAN Interface for the Orlando and Tampa sites, and• configuring RIP and SAP to communicate with the Dallas routerCONFIGURE DEVICESFirst, we need to identify the devices to which masternet will connect. We need to configure an IPXWAN device for the Dallas site, and we need to configure Remote LAN devices for the Tampa andOrlando sites.A DD IPX WAN D EVICEPress 3 at the Security Menu, and the Device Level Database Menu will be displayed. To enable theOn-node Device Database, press 1 and follow the on-screen instructions.To add the remote devices, press 2 (On-node Device entries). Press 1 to configure the information forour first device, dallasnet. You will be prompted for the device name, followed by the Device TableMenu:After the new device name has been specified, a screen similar to the following is displayed.This menu provides various configuration options for the device dallasnet. For purposes of ourexample, we will provide the following ISDN and Authentication information.ISDN InformationFrom the Device Table Menu, select ISDN.Accept the ISDN Line Protocol default value of PPP, as well as the default values for Base Data Rateand Initial Data Rate. However, increase the Maximum Data Rate to 256,000 (to use a maximum ofDevice Name?dallasnetDevice Table Menu: (Device = “dallasnet”)1) ISDN2) Frame Relay3) X.254) Authentication5) IP6) IPX7) AppleTalk8) Bridging9) CompressionSelect function from above or for previous menu: