Cabletron Systems Cyber SWITCH 1000 User Manual

Cabletron Systems Cyber SWITCH 1000 User Manual Manual pdf 74 page image

EXAMPLE NETWORKS74 CyberSWITCHC ONFIGURING S YSTEM O PTIONS AND I NFORMATIONTo configure System Options and Information, press 2 at the Security Menu. By default, all systemoptions are enabled by default, which is acceptable for this network.Press “2” at the System Options and Information Menu. This is where we will configure the systeminformation for SITE1. Enter SITE1 as the system name, and df8sfds33 as the system secret:Return to the Main Menu, and save your configuration changes. Reboot SITE1 to activate yourchanges.C ONFIGURE SITE2The initial configurations of SITE1 and SITE2 are similar. For the initial configuration of SITE2,duplicate the steps found in the section titled, Configure SITE1 (page 65).CONFIGURING SITE2 O PTIONSFor this example, we only need IP routing enabled. Unlike the SITE1, we do not need to enable IProuting for the SITE2. IP routing is enabled as a default for SITE2. We do need to configure IPinterface information.C ONFIGURING THE IP I NTERFACE I NFORMATIONTo configure the IP interface information for SITE2, use the same instructions provided for SITE1(page 66), with the following exceptions:IP Interfaces for SITE2:• Configure the LAN Network InterfaceThe IP address is 128.3.3.1.A DDING D EVICE SITE1Follow the instructions used for configuring device SITE1 (page 68) with the following exceptions:• Device Name: SITE1• Dial-Out Phone Number: 918105551234• CHAP Secret: df8sfds33System Information Menu:1) System Name is "SITE1"2) System Password is ""3) System Secret is "df8sds33"Select function from above or for previous menu?