Cabletron Systems Cyber SWITCH 1000 User Manual

Cabletron Systems Cyber SWITCH 1000 User Manual Manual pdf 75 page image

Workgroup Remote Access Switch 75IP ROUTING N ETWORK WITH PPP DEVICESVerify the InstallationC ONFIGURING S TATIC R OUTESTo configure the static route information for SITE2, refer to the instructions provided for SITE1(page 71) with the following exceptions:Static Route for SITE2:• Enter Y when asked if this static route is a default route.• Enter SITE1 for the Next Hop name.CONFIGURING S ECURITYC ONFIGURING S YSTEM O PTIONS AND I NFORMATIONFollow the instructions used for configuring the system information for SITE1 (page 74) with thefollowing system information exceptions:• System Name: SITE2• System Secret: ikcd98sSAVE CONFIGURATION F ILESWe have now configured all the required information for SITE2. Return to the Main Menu, saveyour configuration files, and exit. Restart the SITE2 to activate the changes.V ERIFY THE INSTALLATIONSteps on how to verify the installation are detailed in the System Verification chapter of the User’sGuide. This section gives an outline of which steps should be executed for Example 1.On each system:Verify resources are operationalIssuedr commandLook for WAN board initialized messagesLook for BRI line messagesLook for LAN initialization messagesLook for Bridge initialization messagesVerify WAN Lines AvailableConnect WAN linesIssuedr commandLook for “Data Link up 1,1” in reportsOn SITE1:Check connectivity to local devicesIP PING 128.1.1.8 (host)IP PING 128.1.1.3 (server)IP PING 128.1.1.7 (router)Check connectivity to SITE2CALL DEVICE SITE2Check connectivity to remote devicesIP PING 128.3.3.1 (SITE2)IP PING 128.3.3.4 (host)