Cabletron Systems CyberSWITCH CSX1000 Quick Start Manual

Also see for CyberSWITCH CSX1000: User guide User guide

Contents

CONNECTIVITYOVERVIEWThe Workgroup CyberSWITCH can communicate with various other CyberSWITCH products viaa PPP connection. This connection can be used to transmit data and provide remote managementof your remote systems with Telnet, TFTP and SNMP. We will describe how to set up a PPPconnection with other CyberSWITCH systems, including the CSX100. For these examples, we areassuming that CyberSWITCH “Remote” is the remote system, and will want to call intoCyberSWITCH “Central”; Central may or may not want to call Remote.C ONNECTING A W ORKGROUP PRODUCT TO A S MALL O FFICE P RODUCT VIA PPPIn this section, we describe the configuration steps required for connecting a workgroup system toa small office system via PPP. Separate instructions are included for bridging, IP routing with anUnNumbered Interface, IPX routing, and AppleTalk routing configurations.BRIDGE TO B RIDGE CONFIGURATIONConfiguration for Site "Central"The configuration on Central to allow Bridging to Remote using PPP is as follows:1. Perform initial configuration steps.2. Select Options from the main menu.3. Select Bridging from the options menu, then ensure that bridging is enabled.4. Select IP Routing from the options menu, then disable IP routing to allow timely bridging of IPdata.ISDNServerCSX1200 CSX150Phone 13135551111 Phone 13135552222POWER SERVICE TX RX 10BASE - TLAN B-CHANNELS E1 ONLYB2 B4 B6 B8 B26 B28B22 B24B18 B20B14 B16B10 B12 B30 L1B1 B3 B5 B7 B25 B27B21 B23B17 B19B13 B15B9 B11 B29 B31E1D T1D"Central" "Remote"