Cabletron Systems CyberSWITCH CSX1000 Quick Start Manual

Also see for CyberSWITCH CSX1000: User guide User guide

Contents

QUICK START32 CyberSWITCH2. Configure the CSX100 system information.a. Accept the Local Ethernet IP Address. Click Next.b. Set your CyberSWITCH Name (Remote) and System Password (Remote_S).c. Select your switch type.d. Enter the directory number for the CSX100 (13135552222). Click Next twice.3. Define Central as a remote connection.a. Click Add Remote, enter Central, and click OK.b. Set the password. Click Remote’s Password and enter Central_S twice for confirmation.c. Define Central’s phone settings. Enter 13135551111.d. Optional: Define Caller ID Numbers if Caller ID Security was enabled. Click Next.e. Enable Inbound and Outbound Bridging by clicking in the boxes.4. Click Save.APPLE TALK ROUTER TO BRIDGE C ONFIGURATIONC ONFIGURATION FOR S ITE “CENTRAL”The configuration on Central to allow AppleTalk Routing to Remote is as follows:1. Perform initial configuration steps.2. Under Options, select AppleTalk Routing, then:a. Enable AppleTalk routing.b. Under AppleTalk Port Information, configure a LAN port:• Select the LAN port type.• Enter lanport1 for the port name.• Enter 1 for the LAN port number.• Select the Extended network type (the default).• Enter 10-13 for the network range.• Accept the default of none for the suggested AppleTalk address.Central's AppleTalk ConfigurationNetwork Range: 10-13Zones:Central.Engineering (default)Central.MarketingCSX1200 CSX100MAC MAC MAC MACISDN"Remote""Central"C A B L E T R O N S Y S T E M SPOWER SERVICE TX RX 10BASE - TLAN B-CHANNELS E1 ONLYB2 B4 B6 B8 B26 B28B22 B24B18 B20B14 B16B10 B12 B30 L1B1 B3 B5 B7 B25 B27B21 B23B17 B19B13 B15B9 B11 B29 B31E1D T1D

/ 34

Related manuals for Cabletron Systems CyberSWITCH CSX1000