DEVICE STATISTICS SCREEN COMMANDSEMM-E6 User’s Guide11-3RUNT PACKETSDisplays the number of runt packets received from the network. Arunt packet is less than the minimum Ethernet frame size of 64 bytes,not including preamble.GIANT PACKETSDisplays the number of giant packets receivedfrom the network. Agiant packet is greater than the maximum Ethernet frame size of 1518bytes, not including preamble.PORT ADMIN. STATUSDisplays the administrative status of the port selected. The twopossible status messages are Enable or Disable.PORT SEG. STATUSDisplays the segmentation status of the port selected. The twopossible status messages are Segmented or Unsegmented. TheEMM-E6 automatically partitions problem ports or interfaces (thosehaving 32 consecutive collisions, and re-connects non-problemsegments to the network.11.2 DEVICE STATISTICS SCREEN COMMANDSThe Device Statistics screen provides several commands that allow you toaccess and manipulate various boards and ports. This section first gives abrief description of each command, and then explains how to use them.ENABLE PORTThis command lets you enable the selected port.DISABLE PORTThis command lets you Disable the selected port.UPDATE-FREQThis command lets you select the time interval between Network/Slot/Port counter updates. You can choose update intervals inincrements of 3 seconds, with the maximum interval being 99seconds.
