STANDARD LOCAL DOWNLOADEMM-E6 User's Guide15-715.3 STANDARD LOCAL DOWNLOADTable 15-1 provides a step by step procedure for downloading thefirmware image file. This section provides specific MIB OIDs, theirnames, and the required setting for proper image file download. Refer toyour specific MIB walking tool documentation for instructions on how toset MIB OID strings.The Download OIDs for Cabletron products reside in Cabletronenterprise MIBs (group 52). The specific OIDs necessary to perform animage file download reside in the common download group underctDL (Cabletron Download). The full OID string to reach this group is:1.3.6.1.4.1.52.4.1.5.8.1When performing the steps in Table 15-1, keep the following in mind:• You must follow the steps in order.• Enter the IP address of the tftp server in standard dotted decimalnotation (e.g., 132.177.118.24).• Enter the FULL path to the image file in the ctDLTFTPRequest OID,including the name of the image file (e.g., c:\tftpboot\EMME6.hex).Table 15-1. Standard Download ProcedureStep OID Name OID Number DataTypeSNMPOID Data(1). ctDLForceOnBoot 1.3.6.1.4.1.52.4.1.5.8.1.1.0 integer 1(2). ctDLCommitRAMToFlash 1.3.6.1.4.1.52.4.1.5.8.1.2.0 integer 1(3). ctDLTFTPRequestHost 1.3.6.1.4.1.52.4.1.5.8.1.4.0 IPaddressEnter the IPaddress ofthe tftpserver.(4). ctDLTFTPRequest 1.3.6.1.4.1.52.4.1.5.8.1.5.0 string(ASCII)Enter thepath to theimage file.(5). ctDLInitiateColdBoot 1.3.6.1.4.1.52.4.1.5.8.1.3.0 integer 1
