EMM-E6 QUICK REFERENCE CARDEMM-E6 QUICK REFERENCE CARDLED DESCRIPTIONCPUFlashing Green: Board OperatingProperly.Red: CPU error condition.STBYA, B, C, DAmber indicates port or interfaceplaced in standby state.RCVA, B, C, DGreen indicates valid link from stationto EMM-E6 interface.Amber indicates segment receivingtraffic.XMTA, B, C, DGreen indicates segment istransmitting traffic.Flashing red indicates port in standbydue to spanning tree operation.CLNA, B, C, DRed indicates collision detected onsegment. Occasional activation of CLNLED is normal.Switch Function1 Cabletron Systems Use Only. Must be in OFF position.2 Cabletron Systems Use Only. Must be in OFF position.3 Cabletron Systems Use Only. Must be in OFF position.4 MIMREV. Should be OFF unless THN-MIM s with part numbers below9000043-05 are located in the MMAC.5 Baud Rate Default. Sets local management console port baud rate. OFF(default) = 9600 Baud, ON = 2400 baud.6 Forced Download. When toggled, forces image files to be loaded fromBOOTP server by clearing information from NVRAM.7 NVRAM Reset. When toggled, deletes user parameters stored in NVRAMand returns these parameters to factory default settings.8Password Default. When toggled, deletes user defined passwords storedin NVRAM and returns these passwords to factory default settings (publicor [Return]).EMM-E6STBYRCVXMTCLND C B ACPURESETSNBRIM-A100SWITCH SETTINGSLANVIEW LEDs
