CHAPTER 11: DEVICE STATISTICS SCREEN11-4EMM-E6 User’s GuideNETWORKThis command lets you select the network you want to monitor. Thechoices range from A to F, depending on the configuration of yournetwork and the options available from this configuration. Forexample, if you do not have a Media Interface Module running on theA Channel, the EMM-E6 automatically disallows Channel A as anetwork selection.SLOTThis command lets you select the MMAC hub slot that you want tomonitor. The choices vary depending on the MMAC chassis you use.The far right slot is always slot number one (1).PORTThis command lets you select and view port statistics for ports 1through 26 of the device residing in the selected Slot.11.2.1 Selecting an Update FrequencyThe EMM-E6 updates the Device Statistics screen every three seconds bydefault. The EMM-E6 allows you to adjust this frequency in intervals ofthree seconds (maximum frequency is 99 seconds).To adjust the UPDATE-FREQ:1. Use the arrow keys to highlight the UPDATE-FREQ command.2. Press the Shift and + keys together, or just the - key until the desiredtime/frequency appears (this number increments/decrements in 3second intervals; minimum = 3 seconds; maximum = 99 seconds).3. Press the Return key to set and save the changes to theUPDATE-FREQ field.
