9030367 E7 Device Views2-9Logical MIM RepresentationPort PerformanceIndicates the frame rate for the port. You can change this display using theGauge Control Panel, which is described later in this chapter. When you haveaccessed the Logical MIM representation through the Physical MIMrepresentation, the Port Performance label displays a gauge. The rates orpercentages measured by this gauge depend on the setting of the LogicalGauges and Gauge Mode buttons. You can double-click on the PortPerformance Gauge to bring up the port performance view, which is describedin Chapter6.You can also access several generic views from the View and Device Menupulldown menus. These generic views include:• Configuration View• Performance View• Diagnostic View• Application View• Display Logical/Physical MIMsThe procedures for displaying these generic views are given in the sectiontitled “Changing MIM Representations” later in this chapter.Figures 2-4 through 2-6 show some examples of Device Views for Cabletronhubs. The examples show one or more modules displayed in a LogicalRepresentation.Table 2-3. Port Status ValuesStatus Color CodeNLNK (No link) YellowON GreenOFF BlueSEG (Segmented) RedNSQE Green (IRBM)SQE Green (IRBM)CL Blue (IRBM)NOTESome modules may not support logical MIM representations. Refer to thespecific module’s hardware documentation.
