Cabletron Systems Ethernet Hubs Manual

Contents

Application View DescriptionIRBM MMAC Bridge Database ViewApplication Views Cabletron Ethernet Hubs3-10 Management Module GuideIRBM MMAC Bridge Database ViewYou can access the IRBM MMAC Bridge Database View by clicking on theBridge Databases button in the IRBM MMAC Application View. The IRBMMMAC Bridge Database View provides the following information:Model NameThe user-defined or default name of the IRBM model.Acquired DatabaseThe following fields and buttons appear under the Acquired Databaseheading:Total EntriesThe total number of entries in the acquired database.Maximum EntriesThe maximum number of entries allowed in the acquired database.Static EntriesThe number of addresses added to the acquired database by you or thenetwork manager.Static Entry Age LmtThe length of time allowed for a static entry in the acquired database to beinactive before it is dropped from the database. This time is fixed at zero (0).Dynamic EntriesThe number of entries that have been accumulated in the acquired databasethrough the bridge’s learning process.Reassembly Fails Displays the total number of IP datagram fragmentreassembly failures detected by the IP reassemblyalgorithm due to time out, errors, etc.Fragment OKs Displays the total number of IP datagrams that have beensuccessfully fragmented by the hub.Fragment Fails Displays the total number of IP datagrams that could notbe fragmented by the hub because their Don’t Fragmentflag was set.Fragment Creates Displays the total of IP datagram fragments that have beengenerated by the hub as a result of fragmentation.Table 3-4. SNMP IP Group View Information (Continued)Field Definition