MIM Performance ViewIRBM, IRM2, IRM3 and MiniMMAC HubsPerformance Views Cabletron Ethernet Hubs6-8 Management Module GuideThis button allows you to toggle how the multi-attribute line graph isdisplayed. You can display the network statistics in Logarithmic or Linearformat.This button, not available for the IRM3, displays the same Detail view asdescribed earlieer in this chapter. Refer to that section for information on thisview.This button, available only for the IRM3, provides the same information asthe Detail button for IRM2, IRBM, and MiniMMAC hubs.This button, available only for the IRM3, displays two pie charts. The FrameSize pie chart shows the total number of frames, grouped according to theirsize in bytes. The Protocol pie chart shows the number of frames per protocoltype.This button allows you to view historical data related to module performance.For example, if you set a date and time for two days ago, you can view moduleperformance statistics for two days ago.This button lets you change how time is measured on the line graph in theMIM Performance View. You can choose to display statistics in time blocksranging from 1 to 100 hours.This button opens the MIM Configuration View. This view allows you toconfigure the module information. Table 6-1 provides definitions of the fieldscontained in the MIM Configuration View. This view also has one button. TheConfig Alarms button allows you to access the MIM Configure Alarms View,Log/LinDetailErrorsFramesScroll to Date-TimeChange Time ScaleMIM Configuration
