9030367 E7 Device Views2-13Logical MIM RepresentationGauge Control PanelGauge Control PanelThe Gauge Control Panel allows you to change the type of statisticalinformation presented in the Port Performance label of the Logical MIMRepresentation. To access the Gauge Control Panel, single-click on the right-most module in the hub chassis to highlight it and then select Gauge ControlPanel from the Icon Subviews menu.Selected AttributeThis area of the Gauge Control Panel allows you to select the statisticalattribute displayed on the Logical Interface Icon’s Gauge. The label changescolor to reflect the attribute selected. Refer to Table 4-1 for a list of theattribute definitions.Gauge ModeThis area of the Gauge Control Panel allows you to select the mode presentedby the Logical Gauge. Possible selections are Totals, Rates, or Percentages.The Percentages selection represents the percentage of the interface comparedto the rest of the interfaces, and is not currently supported. Once you selectthese attributes, click the Gauge Control Panel Apply button to activate themode represented in the Logical Gauge Label (f).Gauge TypeThis option allows you to select either a numeric or linear representation ofthe Logical Gauge.
