Getting Started 2-7Figure 2-4 Main MenuThis is the starting point for all menu operations. The organization of the menus isshown in Appendix E.Reviewing Boot MessagesAs an FRX4000/6000 boots, screen information tracks the loading of cards, verifiesconfiguration file format, and displays any errors. This data is displayed only until theFRX software is running; however, it is saved in a file named BOOTRPT.TXT, and theoperator can later display it in a report. This can be used as a tool to verify that startupof the node proceeded without errors, or to remind the user of the number and typesof RLPs in the node. If there is an error reported, the data may aid in fixing theproblem.If an FRX4000/6000 is shut down, then rebooted, the existing BOOTRPT.TXT file willbe renamed BOOTBAK.TXT, and a new BOOTRPT.TXT will be created.BOOTRPT.TXT and BOOTBAK.TXT can be used as follows:1. Display and review the data from the “current” boot of the device.2. Address any reported problems.3. Re-boot the device. (This copies the previous boot data to a backup file.)4. Display the new boot data, and compare it to the previous data. This will showwhether the problem was fixed. Also, a problem that occurred during the previousboot-up will often be cleared up by re-booting.To display the data from the current boot-up, press [C] at the Reports Menu (or [F], then[C] from the Main Menu). To display the data from the previous boot-up (saved in afile called BOOTBAK.TXT), press [D] at the Reports menu (or [F], [D] from the MainMenu).Node Name=node_xyzlVersion "n.n.n"M A I N M E N UA ConfigurationB OperationsC Status DisplaysD EventsE StatisticsF ReportsOption:
