6-4 FRX4000/FRX6000 4.0 User Guide, Rev 01Figure 6-3 Default Configuration Screen for New Port[A],[C],[A] from Main MenuThe entry I/O identifies the LIC containing the port (UNIVERSAL for FRX4000 ports0–3), and Link State will be one of these:Link_disable – The link was shut down by an on-line command, is undergoing re-IPL, or has not yet been established.Failed – Some or all modem controls are missing. (This state is passed throughwhile a port is becoming enabled.)Link_down – The link was up, but has gone down.Disconnect – Level 2 cannot be established.Linkup – The necessary level 1 modem signals are present, and the level 2 link isup.NA – Some state other than those above has been entered.To configure the port with the parameter values neccessary for your application, go tothe appropriate chapter:l Frame relay – Chapter 7l X.25 – Chapter 8l SNA – Chapter 9l BSCI – Chapter 10l BSCB – Chapter 11l Async – Chapter 12If configuring a physical port that will contain logical ports, configure the physicalport as described in the appropriate chapter in the above list, then follow the procedureunder "Configuring Logical X.25 Ports" on page 8-14.Rmtid=nodexyzX.25 Port Parameters (screen 1 of 6)* RLP: 0 Port: 5 Link State: Link_disable* I/O: V.35Database System MemoryA Port Type X.25 X.25B Physical Port Interface V.35 V.35C Blocked Port Flag N ND Line Speed 9600 bps 9600 bpsE Modulo 8 8F Maximum LAPB Window Size 7 7G N2 Retransmit Count 5 5H T1 Retransmit Period (msec) 2000 2000I T2 Wait Ack Period (msec) 1000 1000J T3 Link Alive Period (sec) 10 10K Logical DCE N NL Generate Clock N NM Rcv Clock (TT) from DTE N NOption:
