20-8 FRX4000/FRX6000 4.0 User Guide, Rev 01LAN Card Statistics DisplaysLAN Card statistics track traffic over the LAN interface. Press [G] at the StatisticsMenu and, when prompted, enter:l LAN Card Number: 0 on FRX4000, 0–1 on FRX6000. (Default is 0.)l Report Interval: 5–65535. (Default is 5.)Figure 20-7 LAN Card Statistics Display[E],[G] from Main MenuThis example shows an Ethernet card. A Token Ring card display issimilar. (Statistics for both are listed later.)Information in this Display:l Hardware Status – will be one of these:u Not Installedu Failed Startup Diagnosticsu Failed due to Configuration Problemu Not Operational due to Hardware Faultu Operating Marginally due to Soft Faultsu Fully Operationall MAC Status – can be either/both/neither of these:u Bound – the MAC and protocol drivers are linked to enable communicationbetween them.u Open – the OpenAdapter function, which activates the adapter's networkconnection, is enabled.Node Name=node_xyzLAN Card Statistics DisplayCard Number: 0 Type: Ethernet MTU: 1500Report Interval (sec): 5Current Time: 6/05/97 10:32:45Hardware Status: Fully OperationalMAC Status: Bound, OpenPacket Filters: Directed/Multicast or Group/Functional, BroadcastSTATISTIC CURR CUMULATIVE STATISTIC CURR CUMULATIVEPackets In 21 269134 Packets Out 21 269420Bytes In 8161 139690157 Bytes Out 8161 139822450Multi-Cast In 0 0 Multi-CastOut 0 0Broadcast In 0 0 Broadcast Out 0 0Frm Dropped In 0 0 Frm Dropped Out 0 0Q Dropped In 0 0 Dropped Timeout 0 0Errors In 0 0Alignment Errors 0 0 Xmit w/1 Coll 0 0Overrun Errors 0 0 Xmit w/mul Coll 0 0Xmt/Deferral 0 0 Xmt CD Heartbeat 0 0Not Xmt (Coll) 0 0 Frm w/Lost CS 0 0Late Collision 0 0 Underruns 0 0F4: Clear Cumulative Statistics, Others: Exit
