3. When the screen displays “Insert Disc (number)”,insert the disc partway into the slot, label side up.The system pulls it in and starts playing. The systemdisplays the type of disc inserted, DVD - Video,B Audio for CD/DTS, MP3 for MP3 CDs, orDVD - Audio.To load multiple discs:1. Press and hold the load hard key.2. When the screen displays “Insert Disc (number)”,load the disc partway into the slot, label side up.The system pulls it in.3. Once a CD is loaded, the system displays “InsertDisc (number)” again. Load the next disc. Repeatthis procedure for each disc. The player takesup to six disc(s), do not try to load more than six.The system will not display the disc types whenloading all, until the discs have been read by thesystem.Once all discs have been inserted, the systemstarts playing the last loaded disc.If no CD or DVD is loaded in the CD/DVD changerand the SRCE hard key is pressed, a “No discloaded” error message displays.Select the Cancel screen button, when available, tostop the loading process and to start playing thelast loaded disc.Z (Eject): To eject a disc:1. Press the eject hard key.2. Select the slot number, 1 through 6, to ejectthe disc.3. The system displays “Ejecting Disc” and then ejectsthe disc.If a selection is not made, the system ejects thedisc from the current slot. If the disc is not removedfrom the slot, the system pulls it back in after10 seconds and starts playing it.To eject all discs at once, press and hold the ejecthard key. The system displays the disc number beingejected.3-14