Cadillac 2009 STS Manual

Also see for 2009 STS: Owner's manual Get to know

Contents

3. Press the CONFIG hard key.4. Adjust the settings for the driver seat, the outsidemirrors, and the steering column to a comfortabledriving position or exit position.5. Push and hold either the Driver 1 or Driver 2 screenbuttons to store the driving positions. Push andhold the Set Exit screen button to store theexit position.Two beeps are heard to confirm that the driver orexit position is stored.The memory settings are now programmed.Any changes that are made to the Head-UpDisplay (HUD), navigation system, and climatecontrols while driving automatically stores whenthen ignition is turned off.Recall Memory SettingsTo recall memory settings:1. Be sure the ignition is either on, in accessory mode,or in RAP. The vehicle must be stopped and/or theshift lever must be in P (Park).2. Press the CONFIG hard key.3. Push and release either the Driver 1 or Driver 2screen buttons to recall the driving positions.Push and release the Set Exit screen button torecall the exit position.If the vehicle is in P (Park), a beep is heard andyour previously saved driving position or exitposition is recalled. If the vehicle is not in P (Park),three beeps are heard and your previously saveddriving position or exit position will not be recalled.A memory recall can be stopped by pressing anymemory seat or mirror position button. To have thestored driving positions recalled when unlockingthe vehicle with the keyless access transmitter orwhen starting the vehicle, see “Occupant Position”under Personalization on page 5-2 for moreinformation.2-69