Entering the Personalization MenuTo enter the personal settings mode:1. Turn the ignition to either on, Acc. (accessory), or inRetained Accessory Power (RAP). See “IgnitionPositions” in the Index of your vehicle’s ownermanual.The transmission must be in either P (Park), or thevehicle must be stopped.To avoid draining the vehicle’s battery, make surethe headlamps are off. See “Headlamps” in theIndex of the vehicle’s owner manual.2. Press any button on the appropriate keyless accesstransmitter to identify yourself as Driver 1 or Driver 2.The driver number is shown on the back of thekeyless access transmitter.3. Press the CONFIG hard key.4. Touch the Vehicle screen button.5. Access the Personal Menu Setting by pressing thePersonal Settings screen button.6. The appropriate driver information should behighlighted. To change driver numbers, touch theappropriate keyless access transmitter to identifyyourself as Driver 1 or Driver 2. The system showsthe start up screen when the driver is changed.7. The Personal Settings button must be highlighted tocontinue programming. If it is not highlighted, touchit. If it is highlighted, touch any of the buttons onthe right of the screen to begin programming.Some features have submenus that show additionalfeatures that can be turned on or off. After entering asubmenu, select a feature and scroll through the menuand make the necessary change.5-4