Cadillac 2010 DTS Owner's Manual

Also see for 2010 DTS: Owner's manual Brochure Navigation manual Owner's manual

ON: The driver's seat and outside mirrors willautomatically move to the stored driving position whenthe unlock button on the Remote Keyless Entry (RKE)transmitter is pressed. The steering column will alsomove on vehicles with the power tilt and telescopicsteering feature. See Power Tilt Wheel and TelescopicSteering Column on page 4‑4 for more information.See “RELEARN REMOTE KEY” under DIC Operationand Displays on page 4‑61 for more information onmatching transmitters to driver ID numbers.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE STARTIf your vehicle has this feature, it allows you to turnthe remote start off or on. The remote start featureallows you to start the engine from outside of thevehicle using the Remote Keyless Entry (RKE)transmitter. See Remote Vehicle Start on page 3‑7for more information.Press the customization button until REMOTE STARTappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Then pressthe menu up/down button to scroll through the followingsettings:OFF: The remote start feature will be disabled.ON (default): The remote start feature will be enabled.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.FACTORY SETTINGSThis feature allows you to set all of the customizationfeatures back to their factory default settings.Press the customization button until FACTORYSETTINGS appears on the DIC display. Press theset/reset button once to access the settings for thisfeature. Then press the menu up/down button toscroll through the following settings:RESTORE ALL (default): The customization featureswill be set to their factory default settings.DO NOT RESTORE: The customization features willnot be set to their factory default settings.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.4-87