Notice: Contact your dealer before adding anyequipment.Adding audio or communication equipment couldinterfere with the operation of the vehicle's engine,radio, or other systems, and could damage them.Follow federal rules covering mobile radio andtelephone equipment.The vehicle has Retained Accessory Power (RAP).With RAP, the audio system can be played even afterthe ignition is turned off. See Retained AccessoryPower (RAP) on page 3‑24 for more information.Setting the ClockRadio with a Single CD or aSix-Disc CD PlayerThe vehicle has an analog clock as well as the digitalradio clock. At the time of new vehicle delivery, thedigital radio clock display should be disabled. If youdecide to use the digital radio clock as well as theanalog clock, you can change the setting to enablethe radio clock display.Enabling/Disabling the Digital RadioClockFor the Single CD PlayerTo turn the radio clock display on or off:1. Turn the radio on.2. Press the H button until the clock and date settingmenus appear.3. Press the pushbutton located under the forwardarrow tab until the menu for default clock and datesettings appear.4. Press the pushbutton located under thecurrently displayed status of either ON or OFF.The ON display indicates the radio clock display isdisabled and the OFF display indicates the radioclock display is enabled. Press this pushbutton totoggle the radio clock display on or off.If the radio clock display is turned on, the screendisplays Radio Clock ON for 10 seconds, thenreturns to the original clock display menu.If the radio clock display is turned off, thescreen displays Radio Clock OFF for 10 seconds.The menus for clock and date settings areremoved, and ON displays as a current statusindicating that the clock display can be turnedon, if desired.4-89