Cadillac 2010 DTS Owner's Manual

Also see for 2010 DTS: Owner's manual Brochure Navigation manual Owner's manual

If you use the RKE transmitter to enter the vehicle andthe remote recall memory feature is on, automatic seatand mirror movement will occur. See “MEMORY SEATRECALL” under DIC Vehicle Customization onpage 4‑79 for more information.To stop recall movement of the memory feature at anytime, press one of the power seat controls, memorybuttons, power tilt wheel control, or power mirrorbuttons.If something has blocked the driver seat and/or thesteering column while recalling a memory position, thedriver seat and/or the steering column recall may stop.If this happens remove the obstruction, then press theappropriate control for the area that is not recalling fortwo seconds. Try recalling the memory position againby pressing the appropriate memory button. If thememory position is still not recalling, see your dealerfor service.Easy Exit RecallThe control for this feature is located on the driver doorpanel between buttons 1 and 2.With the vehicle in P (Park), the exit position can berecalled by pressing the exit button. You will hear asingle beep. The driver seat will move back, and if thevehicle has the power tilt wheel and telescopic steeringfeature, the power telescopic steering column will moveup and forward.If the easy exit seat feature is on in the DIC, automaticseat and power telescopic steering column movementwill occur when the key is removed from the ignition.See “EASY EXIT RECALL” under DIC VehicleCustomization on page 4‑79 for more information.Further programming for automatic seat and steeringwheel movement can be done using the DriverInformation Center (DIC). You can select or not selectthe following:. The easy exit recall feature. The memory seat recall featureFor programming information, see DIC VehicleCustomization on page 4‑79.2-7