Black plate (49,1)Cadillac Escalade/Escalade ESV Owner Manual - 2010SBZA Detection ZonesThe SBZA sensor covers a zone of approximately onelane over from both sides of the vehicle, 3.5 m (11 ft).This zone starts at each side mirror and goes backapproximately 16 ft. (5.0 m). The height of the zone isapproximately between 0.5 m (1.5 ft) and 2.0 m (6 ft) offthe ground.Use caution while changing lanes when towing a trailer,as the SBZA detection zones do not change when atrailer is towed.How the System WorksLeft Side Mirror Display Right Side Mirror DisplayWhen the vehicle is started, both outside mirrordisplays will briefly come on to indicate that the systemis operating. When the vehicle is moving forward, theleft or right side mirror SBZA display will light up if avehicle is detected in that blind zone.If the turn signal is activated and a vehicle is alsodetected on the same side, the SBZA display will flashto give you extra warning not to change lanes.SBZA displays do not come on while the vehicle isapproaching or passing other vehicles. At speedsgreater then 32 km/h (20 mph), SBZA displays maycome on when a vehicle you have passed remains in ordrops back into the detection zone.SBZA can be disabled through the Driver InformationCenter (DIC). See Driver Information Center (DIC) onpage 4‑41 for more information. If the SBZA is disabledby the driver, the SBZA mirror displays will not light upduring normal driving.When the System Does Not Seem To WorkProperlyOccasional missed alerts can occur under normalcircumstances and will increase in wet conditions.The system does not need to be serviced due to anoccasional missed alert. The number of missed alertswill increase with increased rainfall or road spray.If the SBZA displays do not light up when the system ison and vehicles are in the blind zone, the system mayneed service. Take the vehicle to your dealer.3-49InformationProvidedby:
