Black plate (24,1)Cadillac Escalade/Escalade ESV Owner Manual - 2010Automatic Transmission FluidWhen to Check and Change AutomaticTransmission FluidIt is usually not necessary to check the transmissionfluid level. The only reason for fluid loss is atransmission leak or overheating the transmission.If you suspect a small leak, then use the followingchecking procedures to check the fluid level. However,if there is a large leak, then it may be necessary to havethe vehicle towed to a dealer service department andhave it repaired before driving the vehicle further.Notice: Use of the incorrect automatic transmissionfluid may damage the vehicle, and the damages maynot be covered by the vehicle's warranty. Alwaysuse the automatic transmission fluid listed inRecommended Fluids and Lubricants on page 8‑10.Change the fluid and filter at the intervals listed in theMaintenance Schedule. See Scheduled Maintenanceon page 8‑3. Be sure to use the transmission fluidlisted in Recommended Fluids and Lubricants onpage 8‑10.How to Check Automatic TransmissionFluidNotice: Too much or too little fluid can damage thetransmission. Too much can mean that some of thefluid could come out and fall on hot engine parts orexhaust system parts, starting a fire. Too little fluidcould cause the transmission to overheat. Be sureto get an accurate reading if checking thetransmission fluid.Before checking the fluid level, prepare the vehicle asfollows:1. Start the engine and park the vehicle on a levelsurface. Keep the engine running.2. Apply the parking brake and place the shift lever inP (Park).3. With your foot on the brake pedal, move the shiftlever through each gear range, pausing for aboutthree seconds in each range. Then, move the shiftlever back to P (Park).7-24InformationProvidedby:
