Black plate (47,1)Cadillac Escalade/Escalade ESV Owner Manual - 2010Relearn Remote KeyThis display allows you to match Remote Keyless Entry(RKE) transmitters to your vehicle. This procedure willerase all previously learned transmitters. Therefore,they must be relearned as additional transmitters.To match an RKE transmitter to your vehicle:1. Press the vehicle information button untilPRESS V TO RELEARN REMOTE KEY displays.2. Press the set/reset button until REMOTE KEYLEARNING ACTIVE is displayed.3. Press and hold the lock and unlock buttons on thefirst transmitter at the same time for about15 seconds.On vehicles with memory recall seats, the firsttransmitter learned will match driver 1 and thesecond will match driver 2.A chime will sound indicating that the transmitteris matched.4. To match additional transmitters at this time, repeatStep 3.Each vehicle can have a maximum ofeight transmitters matched to it.5. To exit the programming mode, you must cycle thekey to LOCK/OFF.Compass Zone SettingThis display allows for setting the compass zone. SeeDIC Compass on page 4‑47 for more information.Compass RecalibrationThis display allows for calibrating the compass. SeeDIC Compass on page 4‑47 for more information.Blank DisplayThis display shows no information.DIC CompassYour vehicle may have a compass in the DriverInformation Center (DIC).Compass ZoneThe zone is set to zone eight upon leaving the factory.Your dealer will set the correct zone for your location.Under certain circumstances, such as during a longdistance cross-country trip or moving to a new state orprovince, it will be necessary to compensate forcompass variance by resetting the zone through theDIC if the zone is not set correctly.4-47InformationProvidedby:
