Black plate (14,1)Cadillac Escalade/Escalade ESV Owner Manual - 2010Disabling and Resetting IntelliBeam ® atthe Rearview MirrorIntelliBeam ® can be disabled by using the controls onthe inside rearview mirror.AUTO 3 (On/Off): To disable the system, press thisbutton on the inside rearview mirror. The IntelliBeam ®indicator will turn off and will not come back on until theIntelliBeam ® button is pressed again.(Stalk Disable): When IntelliBeam ® has turned on thehigh-beams, pull or push the high-beam stalk. This willdisable IntelliBeam ® . The IntelliBeam ® indicator on themirror will turn off. To re-enable IntelliBeam ® , press theIntelliBeam ® button on the mirror.A different sensitivity setting is available for dealerdiagnostics. This is done by pushing and holding thisbutton for 20 seconds until the IntelliBeam ® indicatorlight flashes three times. If you accidentally activatethis, the vehicle's setting will automatically be reseteach time the ignition is turned off and then on again.Cleaning the IntelliBeam ® Light SensorThe light sensor is locatedon the inside of thevehicle in front of theinside rearview mirror.Clean the light sensor window, periodically, using glasscleaner on a soft cloth. Gently wipe the sensor window.Do not spray glass cleaner directly on the surface of thesensor window.4-14InformationProvidedby:
