Black plate (71,1)Cadillac Escalade/Escalade ESV Owner Manual - 20105. Remove the valve cap from the valve cap stem.Activate the TPMS sensor by increasing ordecreasing the tire's air pressure for five seconds,or until a horn chirp sounds. The horn chirp, whichmay take up to 30 seconds to sound, confirms thatthe sensor identification code has been matched tothis tire and wheel position.6. Proceed to the passenger side front tire, andrepeat the procedure in Step 5.7. Proceed to the passenger side rear tire, and repeatthe procedure in Step 5.8. Proceed to the driver side rear tire, and repeat theprocedure in Step 5. The horn sounds two times toindicate the sensor identification code has beenmatched to the driver side rear tire, and the TPMSsensor matching process is no longer active. TheTIRE LEARNING ACTIVE message on the DICdisplay screen goes off.9. Turn the ignition switch to LOCK/OFF.10. Set all four tires to the recommended air pressurelevel as indicated on the Tire and LoadingInformation label.11. Put the valve caps back on the valve stems.Tire Inspection and RotationWe recommend that you regularly inspect yourvehicle's tires, including the spare tire, for signs ofwear or damage. See When It Is Time for NewTires on page 7‑73 for more information.Tires should be rotated every 5,000 to 8,000 miles(8 000 to 13 000 km). See Scheduled Maintenanceon page 8‑3.The purpose of a regular tire rotation is to achievea uniform wear for all tires on the vehicle. This willensure that your vehicle continues to performmost like it did when the tires were new.7-71InformationProvidedby:
