Black plate (42,1)Cadillac Escalade/Escalade ESV Owner Manual - 20129-42 Driving and OperatingSET − (Set/Coast): Press to setthe speed and activate cruisecontrol or make the vehicledecelerate.[ (Cancel): Press to disengagecruise control without erasing theset speed from memory.Setting Cruise ControlIf the cruise button is on when not inuse, it could get bumped and go intocruise when not desired. Keep thecruise control switch off when cruiseis not being used.The cruise control light on theinstrument panel cluster comes onafter the cruise control has been setto the desired speed.1. Press the I button.2. Get up to the desired speed.3. Press the SET− button locatedon the steering wheel andrelease it.4. Take your foot off theaccelerator.Resuming a Set SpeedIf the cruise control is set at adesired speed and then the brakesare applied, the cruise control isdisengaged without erasing the setspeed from memory.Once the vehicle speed reachesabout 40 km/h (25 mph) or more,press the +RES button on thesteering wheel. The vehicle returnsto the previous set speed and staysthere.Increasing Speed While UsingCruise ControlIf the cruise control system isalready activated,. Press and hold the +RES buttonon the steering wheel until thedesired speed is reached, thenrelease it.. To increase vehicle speed insmall amounts, press the +RESbutton. Each time this is done,the vehicle goes about 1.6 km/h(1 mph) faster.Reducing Speed While UsingCruise ControlIf the cruise control system isalready activated,. Press and hold the SET– buttonon the steering wheel until thedesired lower speed is reached,then release it.. To slow down in small amounts,press the SET– button on thesteering wheel briefly. Each timethis is done, the vehicle goesabout 1.6 km/h (1 mph) slower.Passing Another Vehicle WhileUsing Cruise ControlUse the accelerator pedal toincrease the vehicle speed. Whenyou take your foot off the pedal, thevehicle will slow down to theprevious set cruise speed.
