Media take-up unit5. Push the anges in rmly until the paper core is secured in place and push down the lever(a) toward the shaft.Important• After pushing in the anges rmly, make sure the paper core is secure and does not move around.Move the paper core left and right. If there is a gap between the anges and paper core, repeatsteps 2-4.6. Load the Rewind Spool on the Media Take-up Unit so that the gear of the Rewind Spool (a)meshes with the gear of the Right Media Take-up Unit (b).Important• If you attempt to load the Rewind Spool with the left and right ends inverted by mistake, the MediaTake-up Unit cannot be turned on.• If the gear of the Rewind Spool (a) does not mesh with the gear of the Right Media Take-up Unit (b),the Media Take-up Unit cannot be turned on.7. Press the Menu button to display MAIN MENU.Handling Paper 233
