Network SettingConguring the Printer’s TCP/IP Network SettingsFollow the steps below to congure the TCP/IP network settings.1. Start the web browser and enter the following URL in the Location (or Address ) box to displaythe RemoteUI page.http://“printer IP address or name”/Example: http://xxx.xxx.xxx.xxx/2. Select Administrator Mode and click Logon.3. If a password has been set on the printer, enter the password.4. Click Network in the Device Manager menu at left to display the Network page.5. Click Edit in the upper-right corner of the TCP/IP group to display the Edit TCP/IP ProtocolSettings page.6. Refer to the TCP/IP Settings Items table to complete the settings.TCP/IP Settings ItemsItem Details Default SettingUse DHCP Activate this setting to use DHCPfor conguring the IP address.OffUse BOOTP Activate this setting to useBOOTP for conguring the IPaddress.OffUse RARP Activate this setting to use RARPfor conguring the IP address.OffRAW Mode Bi-direction Activate this setting to useRaw mode bidirectionalcommunication.OffEnable DNS Dynamic Update Activate this setting to performDNS server registrationautomatically.OffUse Zeroconf Function Activate this setting to useBonjour.OnIP Address Specify the printer’s IP address. 0.0.0.0Subnet Mask Specify the printer’s subnet mask. 0.0.0.0Gateway Address Specify the printer’s defaultgateway.0.0.0.0LPD Printing Activate this setting to use LDPPrinting.OnIPP Printing Activate this setting to use IPPPrinting.OnIPP Printer URI Specify the URI of the printer usedfor IPP printing using up to 252characters (1-252 characters).When using a standard Windowsport for IPP printing, enter anURL less than 255 bytes forall characters for “http://address/IPP-URI.”printerNetwork Setting 617
