Network Setting (Windows)Conguring NetWare Network SettingsTo print over a NetWare network, congure the network environment as follows.Important• To congure network settings, you must be logged in with administrative rights such as “Administrator”account. We recommend that your network administrator congure the network settings.1. Specify the Ethernet frame type for communication between the printer and computers.For instructions, see “Specifying the Printer’s Frame Type”. (→P.627)2. Specify the NetWare print services, including the print server and queue.For instructions, see “Specifying NetWare Print Services”. (→P.629)3. Specify NetWare protocol details besides the frame type.For instructions, see “Specifying NetWare Protocols”. (→P.632)After you have completed the steps above, congure each computer for printing over theNetWare network.4. Connect to the NetWare network.Install NetWare client software on each computer to be used for printing over the network, andlog in to the NetWare server or tree. For instructions on connection, refer to the NetWare andoperating system documentation.5. Install the printer driver.Follow the instructions of your network administrator to install the printer driver on each computerto be used for printing. When installing the printer driver, choose Network Printer as the printerdestination, and then choose the print queue created from the NetWare print service settings.6. Follow these steps to congure the printer port.1. Open the Printers and Faxes (or Printers ) window.2. Right-click the printer icon and choose Properties.3. Click the Port (or Advanced ) tab to display the Port (or Advanced ) sheet.4. As the destination port, specify the print queue created by conguring the NetWare print servicesettings.Note• This step is not necessary if you specied the printer destination during installation of the printerdriver.634 Network Setting
