Cutter UnitCutter UnitCutter UnitA reaplacement Cutter Unit.• Cutter Unit CT-06Note• For instructions on replacing the Cutter Unit, see “Replacing the Cutter Unit”. (→P.705)Replacing the Cutter UnitNote• For information on compatible Cutter Unit, see “Cutter Unit”. (→P.705)1. Turn the printer on. (→P.19)2. Press the Menu button to display MAIN MENU.3. Press ▲ or ▼ to select Maintenance, and then press the ► button.4. Press ▲ or ▼ to select Change Cutter, and then press the ► button.5. Press ▲ or ▼ to select Yes, and then press the OK button.After the Carriage is centered, a message is shown on the Display Screen instructing you toopen the Top Cover.Note• If you do not respond within two minutes, cutter replacement is canceled and the printer goes onlineautomatically. In this case, repeat this procedure.6. Open the Top Cover.Maintenance 705
