Network SettingConguring the IP Address Using the Printer ControlPanelThis topic describes how to congure the printer’s IP address on the Control Panel.1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Interface Setup, and then press the ► button.3. Press ▲ or ▼ to select TCP/IP, and then press the ► button.4. Press ▲ or ▼ to select IP Setting, and then press the ► button.5. Press ▲ or ▼ to select IP Address, and then press the ► button.6. Press ◄ or ► to move to another digit for numerical input.7. Press ▲ or ▼ to select the number, and then press the OK button.Note• Hold down ▲ or ▼ to increase or decrease the value continuously.8. Repeat steps 6-7 to enter the IP address assigned to the printer.9. Press the Online button to bring the printer online.If any of the settings are changed, a message for conrmation is displayed. In this case, pressthe OK button.Note• If an error message is displayed, check the settings and correct any invalid values.• To cancel the setup process, hold down the Stop button for a second or more.Important• Be sure to complete step 6. This will activate the values you have entered.• You can also specify the subnet mask and default gateway on the Control Panel.Network Setting 619
