Color adjustment• Default settings will be restored if you select MAIN MENU > System Setup > Reset PaprSetngs > Yes.Because information added or updated using the Media Conguration Tool is also deleted, if paper ofwhich information was added using the Media Conguration Tool was used for color calibration and isnow deleted, such color calibration can no longer be applied to any type of paper. To apply the resultsof color calibration, perform color calibration again using a paper included originally in the defaultsettings that is compatible with color calibration. See the Media Conguration Tool Guide (Windows)or Media Conguration Tool Guide (Macintosh).Note• We recommend using only one type of paper for color calibration. Using the same type of paper forcolor calibration can improve color consistency.• For better color consistency, we recommend performing color calibration under the same conditions oftemperature and humidity each time.• For further adjustment of the color of documents as printed applying color calibration, adjust the color inthe printer driver. (→P.254)• You can check when color calibration was executed and what paper was used from Status Print,imagePROGRAF Status Monitor (in Windows) or imagePROGRAF Printmonitor (on a Macintoshcomputer) in the MAIN MENU on the Control Panel.For menu details, see “Main Menu Settings”. (→P.49)For details on imagePROGRAF Status Monitor, refer to the imagePROGRAF Status Monitor help.For details on imagePROGRAF Printmonitor, refer to the imagePROGRAF Printmonitor help.666 Maintenance
