Messages regarding paperBorderless printng not possible.Check roll position.Cause Corrective ActionPress the Load/Eject button and reload the paper.Insert the roll rmly until it touches the ange of theRoll Holder .(→P.179)(→P.182)The paper is loaded askew.If you press the Online button and continue printing,the document will be printed with a border.The paper loaded is not compatible with borderlessprinting.Load paper compatible with borderless printing andtry printing again. Paper you can use for borderlessprinting is restricted to particular types of paper androlls of particular widths. For information on types ofpaper compatible with borderless printing, refer to thePaper Reference Guide . (→P.169)Because paper expands or contracts depending onthe environment of use, it may become narrower orwider than the supported width for borderless printing.Use each type of paper only where the recommendedenvironmental conditions are met. For details onenvironmental conditions for various paper, see thePaper Reference Guide . (→P.169)Lift the release lever and reload paper.Cause Corrective ActionLift the Release Lever and reload the paper.Insert the roll rmly until it touches the ange of theRoll Holder .(→P.179)Data for a borderless printing job was sent when youare using the Media Take-up Unit , but the paper isloaded crooked.If you press the Online button and continue printing,the document will be printed with a border.Check supported paper.Cause Corrective ActionFollow these steps to change the settings of the printjob to enable borderless printing.1.Hold down the Stop button for a second or moreto cancel printing.2.Make sure the correct printer driver for the printeris selected and try printing again.For information on types of paper compatible withborderless printing, refer to the Paper ReferenceGuide . (→P.169)The print job received species a type or width ofpaper that is not compatible with borderless printing.If you press the Online button and continue printing,the document will be printed with a border.772 Error Message
