x printhead error (x is L, R, or not displayed)Cause Corrective ActionThere is a prob-lem with thePrinthead.Follow these steps to replace the Printhead.1. Open the Top Cover.2. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R ifPrinthead R is displayed. If neither left or right is indicated, replace both Printhead L and Print-head R with new ones.(See "Replacing the Printhead.") →P.911Follow these steps to replace the Printhead.1. Turn off the printer, wait a while, and then turn it on again.2. Replace the left printhead with a new one if Printhead L is displayed and the right one if Print-head R is displayed. If neither left or right is indicated, replace both printheads.(See "Replacing the Printhead.") →P.911No x printhead (x is L, R, or not displayed)Cause Corrective ActionNo Printhead isinstalled.Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is dis-played. If neither left or right is indicated, install both Printhead L and Printhead R.(See "Replacing the Printhead.") →P.911Execute printhead cleaning.Cause Corrective ActionThe Printhead noz-zles are clogged.Follow these steps to clean the Printhead.1. Stop printing by pressing ▲ or ▼ to select Stop Printing.2. Clean the Printhead.(See "Cleaning the Printhead.") →P.910If this message is still displayed, replace the Printhead.(See "Replacing the Printhead.") →P.911Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, notethat this error may affect the printing quality.If OK is shown on the Display Screen, clean the Printhead.1. Press the OK button on the Control Panel to stop printing.2. Clean the Printhead.(See "Cleaning the Printhead.") →P.910If this message is still displayed, replace the Printhead.(See "Replacing the Printhead.") →P.911Error Message > Messages regarding printheads >x printhead error (x is L, R, or not displayed) iPF630012996