Removing the Roll from the PrinterRemove rolls from the printer as follows.Important• Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and theprinter will be unable to keep track of the amount of roll paper left.If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.Note• If you need to cut the roll, see "Specifying the Cutting Method for Rolls." →P.7351. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button.The Paper Menu is displayed.3. Press ▲ or ▼ to select Eject Paper, and then press the OK button.4. Press ▲ or ▼ to select "Yes", and then press the OK button.The roll is now rewound and ejected.Caution• If you have selected ManageRemainRoll > On in the Control Panel menu, a barcode is printed onthe leading edge of the roll.Do not remove the roll before the barcode is printed. You will be unable to keep track of the amountof roll paper left. (See "Keeping Track of the Amount of Roll Paper Left.") →P.732Handling Paper > Handling rolls >Removing the Roll from the Printer iPF63006728
