Specify Scaling, Enlarge/Reduce and PrintYou can specify scaling to enlarge/reduce an image and print. This is useful when you wish to print an image at a specificsize.1. Display the Page Setup sheet.2. Select the size of the media that you want to print in Paper Size.Note• This is not displayed when a checkmark is placed in Borderless Printing.• Fit Roll Paper Widthis set in Enlarged/Reduced Printing.3. Select either Portrait or Landscape as the media orientation for the image in Orientation.Note• When you select Portrait, the image on the media prints as it appears on the screen.• When you select Landscape, the image on the media prints rotated 90 degrees.4. Click the Enlarged/Reduced Printing check box on.Note• This is not displayed when a checkmark is placed in Borderless Printing.5. Select Scaling and input the scaling factor or drag the four corners of the image in the Preview display.Note• You can specify scaling rate in intervals of 0.01%.• You can specify a range between 5.00-600.00%.• The size of the width and height proportionally grow when the image is enlarged/reduced.Mac OS X Software > Print Plug-In for Photoshop/Digital Photo Professional >iPF6300 Specify Scaling, Enlarge/Reduce and Print5651
