MediaType MismatchCause Corrective ActionWhen Detect Mismatch in the ControlPanel menu is set to Pause, the type ofpaper loaded does not match the typespecified in the printer driver.Follow these steps to ensure the paper type matches on the printer and inthe printer driver.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Replace the loaded paper with paper of the type and size you havespecified in the printer driver.The printer will resume printing.(See "Loading and Printing on Rolls.") →P.3(See "Loading and Printing on Sheets.") →P.6Follow these steps to ensure the paper type matches on the printer and inthe printer driver.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Either change the type of paper specified in the printer driver settingsor replace the loaded paper and change the paper type setting on theprinter.(See "Loading and Printing on Rolls.") →P.3(See "Loading and Printing on Sheets.") →P.6Press ▲ or ▼ to select Print, and then press the OK button to resumeprinting.However, note that this error may cause paper jams and affect the printingquality.When Detect Mismatch in the ControlPanel menu is set to Warning, the type ofpaper loaded does not match the typespecified in the printer driver.You can continue to print, but note that this error may cause problems inthe printing results.The paper is too small.Cause Corrective ActionWhen Detect Mismatch in the Control Panelmenu is set to Pause, paper smaller than thesize specified in the printer driver is loaded.Press ▲ or ▼ to select Print, and then press the OK button to resumeprinting.However, note that this error may cause paper jams and affect theprinting quality.Adjust the paper size setting in the printer driver to match the size loa-ded in the printer as follows.1. Press ▲ or ▼ to select Stop Printing, and then press the OK but-ton.2. Change the paper size setting in the printer driver to the size loadedin the printer and try printing again.Replace the loaded paper with paper of a size that matches the size set-ting in the printer driver as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK but-ton to stop printing.2. Replace the loaded paper to match the paper width setting in theprinter driver and try printing again.Error Message > Messages regarding paper >iPF6300 MediaType Mismatch12979
