Note• Select the optimal ink level by referring to the help.• If you cannot obtain sufficiently high quality printing no matter which maximum ink usage level youselect, use the Step 1: Select the standard paper dialog box to change the paper that is the basis ofthe custom paper to another paper.Important• Because this settings imposes an upper limit on the amount of ink used during printing, the printingresult might not change even if the level is changed depending on the image.• The color tone cannot be configured using the Media Configuration Tool. Although the color tonemay change when the maximum ink usage is changed, at this point you should select the optimal lev-el by only focusing on bleeding and scraping of ink. If the color tone needs to be adjusted, provide anICC color profile that matches the paper you are using, and select that ICC color profile in your soft-ware.• Depending on the maximum ink usage setting, some of the print qualities in the printer driver maybecome unselectable.13. Configure Head Height and Vacuum Strength as required and click the Next button.Usually, these do not need to be set.Important• If you set the Head Height lower than the automatically set height in parentheses ( ), check that theprinthead does not rub against the paper. (If the printhead rubs against the paper, there will bescratches in the printing results.) If the printhead rubs against the paper, this can cause damage to theprinthead.• If you change the Vacuum Strength, check that the printhead is not rubbing against the paper. (If theprinthead rubs against the paper, there will be scratches in the printing results.) If the printhead rubsagainst the paper, this can cause damage to the printhead.• For details on the Head Height and Vacuum Strength, refer to the help.Mac OS X Software > Media Configuration Tool >iPF6300 Add Custom Paper5701
