Setting Item Description, InstructionsMain-te-nanceReplace P.head When replacing the Printhead, choose Yes and fol-low the instructions on the screen. (See "Replacingthe Printhead.") →P.911Not displayed during a warning message that the re-maining Maintenance Cartridge capacity is low.Repl. maint cart When replacing the Maintenance Cartridge, chooseYes and follow the instructions on the screen. (See"Replacing the Maintenance Cartridge.")→P.919HeadInfoPrinthead L Indicates information about the printhead.Printhead RClean Platen Choose Yes to move the Carriage in preparation forcleaning the Platen.Inter-faceSetupEOP Timer Specify the timeout period before cancellation ofprint jobs that cannot be received by the printer.TCP/IPIPv4 IPv4 Mode Choose whether the printer IP address is configuredautomatically or a static IP address is entered man-ually.Proto-colDHCP Specify the protocol used to configure the IP addressautomatically.BOOTPRARPIPv4Set-tingsIP Address Specify the printer network information when usinga static IP address.Enter the IP address assigned to the printer, as wellas the network subnet mask and default gateway.The value that was automatically configured is dis-played if you have set IPv4 Mode to Automatic.Subnet MaskDefault G/WDNSSet-tingsDNS Dync up-dateSpecify whether DNS server registration is updatedautomatically.Pri. DNSSrvAddrSpecify the DNS server address.Sec. DNSSrvAddrDNS Host Name Specify the DNS host name.DNS DomainNameSpecify the DNS domain name.IPv6 IPv6 Support Specify whether to connect via IPv6.IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.DHCPv6 Specify whether DHCPv6 settings are used.DNSSet-tingsDNSDyncupdateState-fullAddrSpecify whether DNS server registration is updatedautomatically.State-lessAddrPrinter Parts > Control Panel >iPF6300 Menu Settings8843
