3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pagesand D Between Scans in B Drying Time, and then click OK.(See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.491Note• By factory default, Drying Time is deactivated ( Off ) for all paper types.• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Modeto Eject in the printer menu.(See "Specifying the Cutting Method for Rolls.") →P.735Specifying the Cutting Method for RollsHow rolls are cut after ejection varies depending on printer settings.Cutting Method Printer Setting Driver SettingAutomat-icThe roll is automatically cut by the Cutter Unitfollowing printer driver settings.MediaMenu >PaperDetails >(VariousTypes ofPaper) >CuttingModeAutomat-icAuto Cut(See"CuttingRoll Pa-per AfterPrint-ing.")→P.190YesEject→P.736Choose this setting if you prefer not to havedocuments dropped immediately after printing,as when waiting for ink to dry.To cut the roll with the Cutter Unit, press theCut button.Eject YesMan-ual→P.737Choose this setting when using media that can-not be cut using the Cutter Unit.Use scissors to cut each document from theroll after printing. For continuous printing (ifyou will cut each page later), select Auto Cut> Yes or select Print Cut Guideline.Manual No YesPrint CutGuide-lineHandling Paper > Handling rolls >iPF6300 Specifying the Cutting Method for Rolls6735
