Chapter 8 Troubleshooting 127Problem Cause SolutionPrinter is not using font Your software may be Change the initialization oryou selected from the overriding the settings. setup string that youroperator panel software sends. You mayneed to do this using a menuor screen provided by yourapplication software. Seeyour application user’smanual for informationabout how your softwareworks with your printer.To enable the font typefacelock function, setFUNCTION 8 to ON. Whenon, the printer will alwaysprint with the font you selectfrom the operator panel.Printout curls Your page may include a Remove the printoutdense amount of ink. immediately and let it dry,then roll it in the directionopposite to the curl.Computer indicates A device time-out occurs Make sure the printer isdevice time-out when your computer sends turned on and on-line.data to the printer but theprinter does not respond. Check that the printer’sThe printer may be off, interface cable is securelyoff-line, or not connected to attached to both the printerthe computer. and the computer.Make sure paper is properlyloaded in the sheet feeder.Try the print operationagain.If you want your computerto continuously retrysending data to the printer’sparallel port, add thefollowing statement to yourAUTOEXEC.BAT file:MODE LPT1,,PTroubleshooting
