Appendix B Application Notes 185Printing envelopes other than the first time1. Choose the Envelope Macro from the Main Screen.2. If you have set up the envelope size, go to Layout and choose Page.3. Choose Paper Size. Make sure the size is 9.5 x 4.12 inches and thediagram shows the paper in wide format. If not, choose Edit and makethe corrections.4. Next, you see the Envelope Editor screen. Fill in the appropriatemailing address.5. Make sure the box for Print Envelopes is checked and the SelectEnvelope Size is 9.5 x 4.12 inches.6. You can also include a Return Address, change the margin settings,and/or change the font with which the envelope is printed. ForWindows, the default font is a Windows font. You may want to select aTrueType font or another printer font.7. After selecting all your options, choose OK. If you are using theWindows driver, you see this message:Windows printer driver did not accept the requestedpaper size. Document will print on paper size theprinter did select.8. Choose OK to print the envelope. If you are using the WordPerfectdriver, no message appears and the printer prints the envelope.Works 3.0 for WindowsTo print envelopes in Works 3.0 for Windows, follow these steps:1. Select Tools.2. Select Envelopes and Labels.3. Create your envelope.4. Go to Page Setup.5. Click on Source, Size, and Orientation.6. Click on Reset.7. Change the Paper Source to Auto Sheet Feeder.8. Change the Paper Size to #10 Envelope (9.5 x 4.1).9. Change the Orientation to Portrait.10. Click on OK.Application Notes
