8-8 Receiving Faxes Chapter 8Receiving Faxes Manually: MANUAL MODEIn MANUAL MODE, if you connect the optional handset, a telephone, or an extension phone toyour unit, you can receive voice calls as well as manually activate reception of faxes. You canactivate reception from your unit or from the telephone or extension phone connected to theunit (this is calledRemote receiving).n• For this mode, you need to connect the optional handset, a telephone, or an extension phone toyour unit. (→ p. 2-6)• Make sure the REMOTE RX setting is enabled (→ p. 14-7). For MultiPASS models, you can alsoenable this setting from the MultiPASS Suite. (→Software User’s Guide)Setting MANUAL MODEFollow this procedure to set the receive mode to MANUAL MODE:1 Press Receive Mode to select MANUALMODE.• After a few seconds, the LCD changes to thisdisplay:Receiving a Fax ManuallyFollow this procedure to receive a fax manually:1 Make sure Manual is displayed in the LCD.(→ above)2 Make sure you have connected the optionalhandset, a telephone, or an extension phoneto the unit. (→ p. 2-6)3 When you hear the optional handset,telephone, or extension phone ring, pick upthe handset.Ex:Ex:MANUAL MODE15:00 Manual15:00 Manual
