Chapter 5 Paper Handling 5-15Paper Handling2 Raise both paper output guides.InkCartridgeBCl-21ColorMade inJapanInkCartridgeBCl-21BlackMade inJapan123 Make sure the paper thickness lever is set toe (right).• For details, → p. 5-6.c Do not set the paper thickness leverwhile the unit is printing since this willcause problems.4 Cut the banner paper along one of theperforations to the length required. Thengently fold along the perforations between thefirst and second sheets.• Your banner can be up to six sheets (1782 mm)long.5 Place the banner paper behind the unit on aflat surface. Then insert the first sheet into themulti-purpose tray q, and align the right edgeof the sheet with the right side of the multi-purpose tray. Slide the paper guide againstthe left edge of the sheet, leaving a 1 mm gapbetween the paper guide and the edge of thesheet w.• Make sure the sheet is under the tab on the multi-purpose tray.• Make sure the sheets behind the unit are alignedwith the multi-purpose tray.Tab
