Chapter 6 Speed Dialling 6-5Speed Dialling4 Press the one-touch speed dialling buttonassigned to the number you wish to fax.• The number registered under that one-touchspeed dialling button is displayed.• If you press the wrong button, press Stop, thenpress the correct button.• NO TEL # appears if no fax number is assignedto the one-touch speed dialling button youpressed.5 Press Start (Start/Scan) to begin scanningfor sending, or wait a few seconds for the unitto begin scanning automatically.• If you prefer the unit never to scan a documentautomatically after a few seconds, disable theTIME OUT setting. (→ p. 14-6)n• You can also use one-touch speed dialling to send a document to more than one destination at atime. (→ p. 7-14)• To dial a telephone number registered for one-touch speed dialling, simply lift the handset andpress the one-touch speed dialling button.Using One-Touch Speed DiallingTo use this feature, you must first register a number for one-touch speed dialling. (→ p. 6-3)Follow this procedure to send documents using one-touch speed dialling:1 Open the document tray (MultiPASS modelsonly).2 Adjust the document feed lever for thedocument you are loading. (→ p. 4-2)3 Prepare the document and load it, face down,in the ADF. (→ p. 4-4)• For colour sending, press Colour/B&W (Color/B&W) to turn on its light. (→ p. 7-3)• To adjust the resolution and contrast, → pp. 7-4,7-5.Ex:(Currently used memory)(Standby to scan)MEMORY USED 0%DOCUMENT READYEx:TEL=905 795 1111
